Training series | Altair's Manufacturing Solutions

Training Series, Design for Advance Manufacturing

Casting simulation to check manufacturing feasability with Inspire Cast

June 22-23 | 4 p.m. to 6 p.m. CEST

Agenda

Day 1

Introduction to InspireCast
Model Setup
High Pressure Die Casting (HPDC)

Day 2

Gravity Casting
3Gravity Process
Gravity Tilt Pouring
Investment Casting

Stamping simulation to check manufacturing feasability using Altair Inspire Form

June 24-25 | 4 p.m. to 6 p.m. CEST

Agenda

Day 1

Introduction to Metal Forming Analysis
Inspire Form Get Started
Create and Modify Geometry
Feasibility Analysis

Day 2

Modify and rerun feasibility analysis
Material Utilization Analysis
Tryout Analysis

Metal Extrusion to check manufacturing feasability using Altair Inspire Extrude Metal

June 29-30 | 4 p.m. to 6 p.m. CEST

Key-to-Metals-Total Materia-04-726x383-1

Agenda

Day 1

Introduction to Metal Extrusion
Inspire Extrusion Metal Get Started
Create and Modify Geometry
Extrusion Metal Analysis

Day 2

Bearing Length optimization
Create and fit material
Transient simulation set up - Front and Back scrap computation
Tool Deflection Analysis
Coupled analysis

Design for Additive Manufacturing with Altair Inspire

June 30 & July 1 | 1 p.m. to 3 p.m. CEST

3D Printed Pen Extreme - Francesco Di Giuseppe

Agenda

Day 1

Introduction to Additive Manufacturing
Inspire for Additive Manufacturing
Additive Manufacturing - Part Selection
Motion, Optimization and PolyNURBS

Day 2

3D Printing - Model Setup, Analysis and Results
3D Printing for Traditional Manufacturing
Lattice Optimization

Polymer Extrusion to check manufacturing feasability using Altair Inspire Extrude Polymer

July 1-2 | 4 p.m. to 6 p.m. CEST

Agenda

Day 1

Introduction to Polymer Extrusion
Inspire Extrusion Polymer Get Started
Create and Modify Geometry
Extrusion Polymer Analysis
Co extrusion analysis set up

Day 2

Create and fit material
Extrusion Polymer Analysis with metal inserts
Tool Deflection Analysis
Calibration Analysis

Injection Molding to check manufacturing feasability

July 7-8 | 4 p.m. to 6 p.m. CEST

Agenda

Day 1

Introduction to Injection Molding Analysis
Simlab Getting Started
Import a Meshed Geometry
Analysis Without Mold

Day 2

Post-Processing Results
Setting Up Analysis With Mold
Reporting Results & Assumptions

Training Series, Design for Advance Manufacturing

Casting simulation to check manufacturing feasability with Inspire Cast

Stamping simulation to check manufacturing feasability using Altair Inspire Form

Metal Extrusion to check manufacturing feasability using Altair Inspire Extrude Metal

Design for Additive Manufacturing with Altair Inspire

Polymer Extrusion to check manufacturing feasability using Altair Inspire Extrude Polymer

Injection Molding to check manufacturing feasability

Fill out the form to request more information