---
title: 2021 Altair Student Webinar Series
---

<https://www.altair.com>

[![Altair Engineering Inc. logo](https://altair.com/images/default-source/default-album/footerlogo.svg) ](https://www.altair.com)

[Terms of Use](https://www.siemens.com/global/en/general/terms-of-use.html) |  [Privacy Notice](https://www.sw.siemens.com/en-US/privacy-policy/) |  [Data Privacy Framework](https://altair.com/privacy-framework) |  [Cookie Notice](https://altair.com/cookie-notice) |  [DMCA](https://sw.siemens.com/en-US/dmca) |  [Whistleblowing](https://www.siemens.com/global/en/company/about/compliance/reporting-channels.html) | 

Cookie Consent

©  Altair Engineering Inc. All Rights Reserved.

![Altair_University_header_interior_desktop_2-1](https://web.altair.com/hubfs/-2021%20IMC%20Approved%20-%20Landing%20Pg.%20Header%20Images/Altair_University_header_interior_desktop_2-1.jpg)

# Altair Student Webinar Series

Track 1: Getting Started Track 2: Advanced Track 3: Getting started with Data

In this webinar series, **Getting Started with Simulation**, Experts from Altair and Universities will demonstrate how to get started with simulation, using advanced simulation technology in a user friendly and easy-to-learn software environment. Visit the demos and presentations and take away knowledge on how to apply simulation on your projects.

September 8

| **Getting Started with Simulation ** Student Team Presentation Ecurie Aix und Simon Hillebrand | ![Composite_Structures-gif](https://web.altair.com/hs-fs/hubfs/Composite_Structures-gif.gif?width=238&name=Composite_Structures-gif.gif) |  |
| --- | --- | --- |
| **[View Recording](https://youtu.be/qkYkbZGBVjE)** | ** ** | ** ** |
| **Multibody simulation of a Geneva Wheel ** Simulate Dynamic Systems (like a car suspension) with Multibody Simulation in Altair® Inspire™ Motion. Extract the loads for your linear or dynamic finite element analysis (FEA) | ![](https://web.altair.com/hs-fs/hubfs/Geneva_Wheel-gif.gif?width=237&name=Geneva_Wheel-gif.gif) |  |
| [**View Recording**](https://youtu.be/7CVWoa32xOk) | ** [View Presentation](https://web.altair.com/hubfs/2021%20Student%20Webinar/0908_02_Getting%20Started%20with%20Multibody%20Dynamics%20-%20Student%20Webinar.pdf?hsLang=en-us)** | ** [Model File](https://web.altair.com/hubfs/2021%20Student%20Webinar/M07_GenevaWheel.x_t?hsLang=en-us)** |
| **Fast Concept Evaluation **Lightning fast and accurate analysis with Altair® SimSolid® – take seconds to minutes for a simulation and get accurate results that would take hours or days with classic FEA | **![](https://web.altair.com/hs-fs/hubfs/Fast_Concept_Eval_SimSolid-gif.gif?width=237&name=Fast_Concept_Eval_SimSolid-gif.gif)** |  |
| [**View Recording**](https://youtu.be/Eyl49FFO1Zw) | ** [View Presentation](https://web.altair.com/hubfs/2021%20Student%20Webinar/0908_03_Getting%20Started%20with%20SimSolid%20-%20Student%20Webinar.pdf?hsLang=en-us)** | ** [Model File](https://web.altair.com/hubfs/2021%20Student%20Webinar/5B-Welded-Frame.ssp?hsLang=en-us)** |
| [**Full recording of Day 1 Session including introductions and Q & A and discussion**](https://youtu.be/3ItDjb02vbg) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0908__00_Altair_Student_Webinar_Series_%20Intro.pdf?hsLang=en-us) |  |  |

 

September 9

| **Lightweight Design **Create lightweight designs and use Altair® Inspire™ to simulate how your structures can be as light as possible. In addition, you can simulate manufacturing processes like 3D-Printing with Inspire** ** | ![](https://web.altair.com/hs-fs/hubfs/Lightweight_design-gif.gif?width=237&name=Lightweight_design-gif.gif) |  |
| --- | --- | --- |
| **[View Recording Part 1 ](https://youtu.be/eauB7RwwWMk)** **[View Recording Part 2](https://youtu.be/G1kbMfDpr1c)** | ** ** | ** [Model File](https://web.altair.com/hubfs/2021%20Student%20Webinar/Door%20Support.x_b?hsLang=en-us)** |
| **CAD Design & Rendering of Simulation Results** In this session, you will learn how to create a 3D CAD model from your optimization results and how to create realistic renderings of your simulation results with Altair® Inspire™ Studio | ![](https://web.altair.com/hs-fs/hubfs/CAD_Design_Rendering-gif.gif?width=237&name=CAD_Design_Rendering-gif.gif) |  |
| [**View Recording**](https://youtu.be/9OwrQoy_htg) | ** ** | ** ** |
| **Simulation of Multiphysics Phenomena**** **Using Altair® SimLab® you can include different simulation disciplines like structural, thermal and electrical designs in a multiphysics simulation environment | ![](https://web.altair.com/hs-fs/hubfs/Multiphysics_Phenomena-gif.gif?width=238&name=Multiphysics_Phenomena-gif.gif) |  |
| [**View Recording**](https://youtu.be/ZfTtx4AY4rk) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0909_04_SimLab-Student-Workshop.pdf?hsLang=en-us) | ** [Model File](https://web.altair.com/hubfs/2021%20Student%20Webinar/TeaPot_Altair.x_b?hsLang=en-us)** |
| [**Full recording of Day 2 Session including introductions and Q & A and discussion**](https://youtu.be/M6CQRa36fyo) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0909_00_Altair%20Student%20Webinar%20Series-1.pdf?hsLang=en-us) | ** ** |  |

September 10

 

| **Electric Drive Concept Design **Altair® FluxMotor® will help you to generate and evaluate concepts of your electric drives. Use the simulation to evaluate  and optimize the performance of your engine | ![](https://web.altair.com/hs-fs/hubfs/Electric_Drive-gif.gif?width=237&name=Electric_Drive-gif.gif) |  |
| --- | --- | --- |
| [**View Recording**](https://youtu.be/mhfp14Dp1d8) |   | ** [Model Files](https://web.altair.com/hubfs/2021%20Student%20Webinar/FluxMotor_Demo_Model.7z?hsLang=en-us)** |
| **System Dynamics and System Controls **You will learn how to build a systems model and simulation of a car - using Altair® Activate®  and Altair® Compose®. Your system models will help you to make decisions at a very early development stage. | ![](https://web.altair.com/hs-fs/hubfs/System_Controls-gif.gif?width=238&name=System_Controls-gif.gif) |  |
| [**View Recording**](https://youtu.be/mh7ZgewJMCY) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0910_02_System%20Dynamics%20and%20System%20Controls%20using%20Altair%20Activate.pdf?hsLang=en-us) | ** [Model Files](https://altairuniversity.com/light-weight-shell-eco-marathon-car-simulation-with-altair-activate/)** |
| [**Full recording of Day 3 Session including introductions and Q & A and discussion**](https://youtu.be/cxC0e7wGG5Y) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/Sept10_Altair_Student_Webinar_Series_%20Intro.pdf?hsLang=en-us) | ** ** |  |

In this **Advanced Simulation** series, you will learn how to apply Structural Analysis, Fluid Analysis and Particle Simulation for more complex tasks. The sessions will include tutorials on external Aerodynamics, Composite Structural Analysis and Discrete Element Analysis.

September 16

| **Structural Analysis of major Formula Student race-car components at TU Wien Racing: Drivetrain,Wishbone, Sandwich Structure **Student Team Presentation Philipp Link | ![](https://web.altair.com/hs-fs/hubfs/Structural_Analysis-gif.gif?width=237&name=Structural_Analysis-gif.gif) |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| [**View Recording**](https://youtu.be/pFGmJ5Ypaes) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/TU%20Wien%20Racing_Altair%20Student%20Webinar%20Series%202021_NEW.pdf?hsLang=en-us) | **[Model Files](https://web.altair.com/hubfs/2021%20Student%20Webinar/TUWien_Files.zip?hsLang=en-us)** |   | ** ** | ** ** | ** ** |   |   |   |  |  |  |  |  |  |  |  |  |  |  |  |
| **Particle Simulation for off-road vehicles and heavy machinery **With the combination of Altair® EDEM™ and multibody analysis you can simulate and evaluate the performance of offtrack vehicles, e.g. on different soils and grounds | **![](https://web.altair.com/hs-fs/hubfs/Particle_Simulation-gif.gif?width=237&name=Particle_Simulation-gif.gif)** |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
| [**V****iew Recording**](https://youtu.be/AHy8O9UZ72M) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0916_02_EDEM_Studentwebinar.pdf?hsLang=en-us) | [**Model Files**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0916_02_EDEM_Demos_webinar2021.7z?hsLang=en-us) |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |  |  |  |
| **Simulation of a Crashbox **You will learn how to simulate a crashbox in an explicit FEA simulation using Altair® Radioss® | **![](https://web.altair.com/hs-fs/hubfs/Simulation_Crashbox-gif.gif?width=236&name=Simulation_Crashbox-gif.gif)** |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
| [**View Recording**](https://youtu.be/0myKA9ml01Q) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0916_02_Introduction_to_Crash_analysis.pdf?hsLang=en-us) | **[Model Files](https://web.altair.com/hubfs/2021%20Student%20Webinar/0916_02_crash_modelfiles.zip?hsLang=en-us)** |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |  |  |  |
| [**Full recording of Day 1 Session including introductions and Q & A and discussion**](https://youtu.be/VVaupEpiSlM) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0916_00_Introduce_Hossein_Altair%20Student%20Webinar%20Series%202021_V1-1.pdf?hsLang=en-us) | ** ** |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |  |  |  |  |

September 17

| **Evaluate External Aerodynamics **Using Altair® Virtual Wind Tunnel™, you will see how to simulate and evaluate the Drag and Lift coefficient of your designs | **![](https://web.altair.com/hs-fs/hubfs/Ext_Aerodynamics-gif.gif?width=237&name=Ext_Aerodynamics-gif.gif)** |  |
| --- | --- | --- |
| [**View Recording**](https://youtu.be/Fnfppbf5kxg) | [** View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0917_01_Evaluate%20external%20aerodynamics%20(1).pptx?hsLang=en-us) | ** [Model Files](https://web.altair.com/hubfs/2021%20Student%20Webinar/Model_Files_EXT_Aero.7z?hsLang=en-us)** |
| **Finite Element Modeling **Learn more about detailed Finite Element Modelling with the next generation User Interface of Altair® HyperWorks™ 2021 | ![](https://web.altair.com/hs-fs/hubfs/FEM-gif.gif?width=237&name=FEM-gif.gif) |  |
| [**View Recording**](https://youtu.be/qEjYdRGb6y0) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0917_02-FE_Modelling_with_HyperWorks.pdf?hsLang=en-us) | ** ** |
| [**Full recording of Day 2 Session including introductions and Q & A and discussion**](https://youtu.be/aZyWvbrZ5p4) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/17_Sept_Altair_Student_Webinar_Series_%20IntroSlides.pdf?hsLang=en-us) | ** ** |  |

September 23

| **Structural Simulation and Optimization **This session will include how to set up a FEA and optimization with HyperWorks and Altair® OptiStruct®.  | ![](https://web.altair.com/hs-fs/hubfs/Struct_Opt-gif.gif?width=237&name=Struct_Opt-gif.gif) |  |
| --- | --- | --- |
| [**View Recording Part 1**](https://youtu.be/3MYkZtr9VCg) [**View Recording Part 2**](https://youtu.be/E7b-aEYcCQs) [**View Recording Part 3**](https://youtu.be/CCrGtGqoxD4) | ** [View Presentation](https://web.altair.com/hubfs/2021%20Student%20Webinar/0923_01-structural_simulation_and_optimisation.pdf?hsLang=en-us)** |   |
| [**Full recording of Day 3 Session including introductions and Q & A and discussion**](https://youtu.be/z0x4Alhdk-M) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0923_00_Altair_Student_Webinar_Series_%20IntroSlides.pdf?hsLang=en-us) | ** ** |  |

September 24

| **Design Composite Structures with Simulation **Learn, how to set up a simulation and optimization for Composite Materials, using HyperWorks and OptiStruct | ![](https://web.altair.com/hs-fs/hubfs/Composite_Structures-gif.gif?width=237&name=Composite_Structures-gif.gif) |  |
| --- | --- | --- |
| [**View Recording Part 1**](https://youtu.be/BB__J0zect4) [**View Recording Part 2**](https://youtu.be/ANlYfh1ywmI) [**View Recording Part 3**](https://youtu.be/R7hIVQ21kmY) | **[View Presentation](https://web.altair.com/hubfs/2021%20Student%20Webinar/003-Design%20Composite%20Structures%20with%20Simulation.pdf?hsLang=en-us)** | **[Model File](https://web.altair.com/hubfs/2021%20Student%20Webinar/09_24_Model_file.zip?hsLang=en-us)** |
| [**Full recording of Day 4 Session including introductions and Q & A and discussion**](https://youtu.be/Xj4JvHwaS2Q) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0924_00_Altair_Student_Webinar_Series_%20IntroSlides.pdf?hsLang=en-us) | ** ** |  |

The third track is all about how to use large amounts of data that you generate in your development processes for predictive modelling and machine learning. The Design Explorer of Altair® HyperWorks™ is an easy-to-use entry into the world of Data. Altair® SmartWorks™ will then allow you to prepare your data and use predictive models to take your design to new a whole new level.

September 30

| **Explore and Optimize Design Parameters **In this session, you will learn how to rapidly change and evaluate different design parameters in the Design Explorer | ![](https://web.altair.com/hs-fs/hubfs/Explore_Opt_Design_Parameters-gif.gif?width=237&name=Explore_Opt_Design_Parameters-gif.gif) |  |
| --- | --- | --- |
| [**View Recording**](https://youtu.be/iYwK1DpuEi4) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0930_01_Getting%20Started%20with%20Design%20Exploration%20in%20HyperWorks%20-%20Student%20Webinar%20-%20Joyce%20Tang%202021.pdf?hsLang=en-us) |   |
| **Collection and preparation of live telemetry data with Schmid Elektronik **Live Telemetry and Data Acquisition | ![](https://web.altair.com/hs-fs/hubfs/Live_Telemetry-gif.gif?width=237&name=Live_Telemetry-gif.gif) |  |
| [** View Recording**](https://youtu.be/yZFO3Fx43Qc) |   | ** ** |
| **Dashboarding for Student Teams **Extract data from different sources to prepare for a live dashboard or predictive data analysis with Altair SmartWorks | ![](https://web.altair.com/hs-fs/hubfs/Dashboarding-gif.gif?width=237&name=Dashboarding-gif.gif) |  |
| [**View Recording**](https://youtu.be/-lEgX6QOdNc) | [**View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0930_03_Student%20Dashboarding_Naman_Pherwani.pdf?hsLang=en-us) |   |
| **Smart Product Development **In this session, you will learn about IoT and Discover how Altair Smartworks IoT accelerates the development of smart connected motorbikes | ![](https://web.altair.com/hs-fs/hubfs/IoT-gif.gif?width=237&name=IoT-gif.gif) |  |
| [** View Recording**](https://youtu.be/E_l9XWm3LyI) | [** View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0930_04_Smart%20Product%20Development.pdf?hsLang=en-us) | ** ** |
| **Basics of Data Analytics and Machine Learning **In this session, you will learn what is Data Analytics and Data Science, and how to do predictions using Machine Learning about downtimes of systems. | ** ** **![](https://web.altair.com/hs-fs/hubfs/ML-gif.gif?width=237&name=ML-gif.gif)** |  |
| [** View Recording**](https://youtu.be/MnqPanr0WUM) | [** View Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0930_05_Student%20Webinar%20series.pdf?hsLang=en-us) | ** ** |
| [**Full recording of Day 1 Session including introductions and Q & A and discussion**](https://youtu.be/cj0xAo-bXXo) [**View Introductory Presentation**](https://web.altair.com/hubfs/2021%20Student%20Webinar/0924_00_Altair_Student_Webinar_Series_%20IntroSlides.pdf?hsLang=en-us) | ** ** |  |

** **